Izinga lokushisa eliphakeme lasentwasahlobo,Iphedi yentwasahlobo yokushisa ephezulu

Imininingwane Yomkhiqizo

Intwasahlobo

High Temperature Spring :

Intwasahlobo iyingxenye yemishini esebenzisa ukunwebeka ukuze isebenze.Izingxenye ezenziwe ngezinto ezinwebekayo ziyawohloka ngaphansi kwesenzo samandla angaphandle, futhi zibuyela esimweni sazo sangempela ngemva kokukhipha amandla angaphandle.Ibuye isetshenziswe njenge "spring".Ngokuvamile eyenziwe spring steel.Izinhlobo zemithombo ziyinkimbinkimbi futhi zihlukahlukene.

Inkampani Yethu Ehlangene Nezimboni Eziyinhloko Ze-Spring Factories futhi zihlinzeka ngama-Springs okushisa aphezulu

Xhumana Nathi Ukuze Ufunde Kabanzi!

• Izisetshenziswa Zasentwasahlobo Zokushisa Okuphezulu:

I-SUS304,I-SUS316, SUS631/17-7PH, SUS632/15-7Mo, 50CrVA, 30W4Cr2VA,

I-Inconel X-750, Isilinganiso 718, I-Nimonic90, I-Incoloy A286(SUH660)

• Izinhlobo zasentwasahlobo:

→Imithombo Yokucindezela →Intwasahlobo yesandiso

→Intwasahlobo yeTorsion →Intwasahlobo egobayo

♦ Intwasahlobo ye-Wave ♦ Intwasahlobo Yokuskrola ♦ I-Disc Spring

♦ I-Ring Spring ♦ I-Special-Shaped Spring, njll

Umshini Wasentwasahlobo

Izinhlobo Zezinto Ezibalulekile	Igama Lempahla	Izinga lokushisa eliphezulu Lokusebenza°C
insimbi engagqwali	SUS304/SUS316	200
	SUS631/17-7PH	370
	SUS632/15-7Mo	470
I-alloy spring steel	50CrVA	300
I-alloy spring steel	30W4Cr2VA	500
Izinga lokushisa eliphakeme le-nickel base alloy	I-Incoloy A286(GH2132)	600
	I-Inconel X-750(GH4145)	600
	I-Inconel 718 (GH4169)	690
	I-Nimonic90(GH4090)	800 (γ＜0.2)
	GH4099	1000 (γ＜0.1)

I-inconel 625 washer, i-Disc spring, i-gasket, indandatho ehlangene

♦♦♦ Disc Springs♦♦♦

Asetshenziswa kakhulu kuma-valve, ama-flange, ama-clutches, amabhuleki, iziguquli ze-torque, i-High-voltage switch, i-bolt tightening, ukwesekwa kwamapayipi, i-shockproof kanye nezinkambu ze-shockproof.bakhiqize ngokuhambisana ne-DIN EN16983 (DIN2093).

Ububanzi bangaphandle busukela ku-6mm kuye ku-1000mm.

Izinto zifaka i-alloy steel 51CrV4, i-carbon steel SK85, 1074;

• Insimbi engagqwali ASTM301, 304, 316, 17-7PH, 17-4PH, 15-7Mo;

• Insimbi ekwazi ukumelana nokushisa i-H13, X30WCrV53, X22CrMoV12-1, X39CrMo17-1;

• Insimbi engagqwali imelana nokushisa okuphezulu Inconel X750, Inconel X718, Nimonic 90, njll.

♦♦♦ I-Wave Springs♦♦♦

I-Wave spring iyingxenye yensimbi enwebekayo emise okwendandatho ezacile eyakhiwa amagagasi nezigodi ezimbalwa.Imithombo ye-Wave isetshenziswa kabanzi kumamotho, imishini yendwangu, imishini ye-hydraulic, izimoto nezinye izimboni.Ukufakwa okuyinhloko kanye nokucaciswa (usayizi ojwayelekile) wekamelo lokuthwala kufanelekile.Noma emgodini, indawo yokufaka incane, futhi inomsebenzi okhethekile wokunciphisa umsindo nokunciphisa ukudlidliza.

Ububanzi bangaphandle busukela ku-6mm kuye ku-1000mm.ububanzi busukela ku-0.4mm kuye ku-5.0mm.

Igagasi-intwasahlobo-01

Ukuvikelwa kokugqwala

I-Phosphating
I-Mechanical galvanizing
I-Nickel plated
Jiaomei

Banezici ze-deformation encane kanye nomthwalo omkhulu.Iphinde ibe nezici ezilandelayo.

Ama-disc springs angathola izici ezihlukene zomthwalo ngokusebenzisa inhlanganisela ehlukene yokuguquguquka nokugqagqana.
Uma kuqhathaniswa nezinye iziphethu, ama-disc springs athatha indawo encane.
Lapho kusetshenziswa amashidi amaningi ngokuhlanganiswa, umphumela wokudambisa uyakhula.
Uma isetshenziswe ngokunengqondo, ngeke ikhubazeke noma iphuke.
Impilo ende yokukhathala.

Izinto Zasentwasahlobo	Isikhathi Sokusebenza	Amandla Okuqina	I-Elastic Modulus KN//mm2							I-Chemistry%
Izinto Zasentwasahlobo	°C	N/mm2	RT°C	100°C	200°C	300°C	400°C	500°C	600°C	C	Si	Mn	P	S	Cr	Ni	Abanye
I-T8A SK85	-50 ukuze +100	1200-1800	206	202	-	-	-	-	-	0.80-0.09	≤ 0.35	≤ 0.50	≤ 0.03	≤ 0.03	≤ 0.20	≤ 0.25	Cu≤0.30
50CrV4 SUP10	-50 ukuze +200	1200-1800	206	202	196	-	-	-	-	0.47-0.55	≤ 0.4	0.7 1.1	≤ 0.025	0.025	0.9 1.2	≤ 0.4	V:0.1 0.25 Mo≤ 0.1
C75	-50 ukuze +100	1200-1800	206	202	-	-	-	-	-	0.70-0,80	0.15-0.35	0.60 0.90	≤ 0.025	0.025	≤ 0.4	≤ 0.4	I-Mo≤ 0.1
60Si2Mn SUP6	-50 ukuze +200	1200-1800	206	202	196	-	-	-	-	0.56-0.64	1.50-2.0	0.6 0.9	≤ 0.035	0.035	≤ 0.35	≤ 0.35
I-X 10CrNi 18-8 SUS301	-200 ukuze +200	1150-1500	190	186	180	-	-	-	-	0.05-0.15	≤ 2.0	≤ 2.0	≤ 0.045	0.015	16.0 19.0	6.0 9.5	I-Mo≤ 0.08
I-X 5CrNi 18-10SUS304	-200 ukuze +200	1000-1500	185	179	171	-	-	-	-	≤ 0.07	≤ 1.0	≤ 2.0	≤ 0.045	0.015	17.0 19.5	6.0 9.5	N≤ 0.11
I-X 5CrNiMo 17-12-2 SUS316	-200 ukuze +200	1000-1500	180	176	171	-	-	-	-	≤ 0.07	≤ 1.0	≤ 2.0	≤ 0.045	0.015	16.5-18.5	10.0 13.0	Mo:2.0-2.5 N≤ 0.11
X 7CrNiAl 17-7 SUS631	-200 ukuze +300	1150-1700	195	190	180	171	-	-	-	≤ 0.09	≤ 0.7	≤ 1.0	≤ 0.04	0.015	16.0 18.0	6.5 7.8	Al:0.7-1.5
I-X5CrNiCuNb 16-4 SUS630	-200 ukuze +300	1150-1700	195	190	180	171	-	-	-	≤ 0.07	≤ 1.0	≤ 1.0	≤ 0.035	0.03	15.0 17.0	3.0 5.0
I-X8CrNiMoAl 15-7-2	-200 ukuze +300	1150-1700	195	190	180	171	-	-	-	≤ 0.09	≤ 1.0	≤ 1.0	≤ 0.04	0.03	14.0 16.0	6.5 7.75	Mo: 2.0-3.0 Al:0.75-1.5
Insimbi I-X39CrMo 17-1	-50 ukuze +400	1200-1400	215	212	205	200	190	-	-	0.33-0.45	≤ 1.0	≤ 1.5	≤ 0.04	0.03	15.5 17.5	≤ 1.0	Mo:0.7-1.3
X 22CrMoV 12-1	-50 ukuze +500	1200-1400	216	209	200	190	179	167	-	0.18-0.24	≤ 0.5	0.4 0.9	≤ 0.025	0.015	11 12.5	0.3-0.8	V:0.25-0.35 Mo:0.8-1.2
X30WCRV53 SKD4	-50 ukuze +500	≥ 1470	216	209	200	190	179	167	-	0.25-0.35	0.15-0.30	0.20 0.40	≤ 0.035	0.035	2.2 2.5	≤ 0.35	V:0.5-0.7 W: 4-5
X40CrMoV5-1 SKD61	-150 ukuze +600	1650-1990	206	200	196	189	186	158	-	0.32 0.40	0.8 1.20	0.20 0.50	≤ 0.030	0.030	4.75 5.50		V:0.80-1.20 Mo:1.1-.75
I-Nickel I-Inconel X750	-200 ukuze +600	≥ 1170	214	207	198	190	179	170	158	≤ 0.08	≤ 0.50	≤ 1.0	≤ 0.02	0.015	14.0 17.0	≥ 70	Co≤ 1.0 Ti 2.25-2.75 Fe 5.0-9.0
I-Inconel X718	-200 ukuze +600	≥ 1240	199	195	190	185	179	174	167	0.02 0.08	≤ 0.35	≤ 0.35	≤ 0.015	0.015	17.0 21.0	50.0 55.0	V≤ 1.0 Mo:0.70-1.15
I-Nimonic 90	-200 ukuze +700	≥ 1100	220	216	208	202	193	187	178	≤ 0.13	≤ 1.0	≤ 1.0	≤ 0.03	0.015	18.0 21.0	U-Bal	V15.0-21.0 Mo:2.0-3.0 Al≤ 0.2

♦ ♦ ♦ Izici Zezinto Zokusebenza Zasentwasahlobo Zokushisa Okuphezulu: ♦ ♦ ♦

♦ 304 insimbi engagqwali
I-304 insimbi engagqwali ikhubazekile ngenxa yokusebenza okubandayo ukuze ithuthukise izakhiwo zayo ezinwebekayo.Ayikwazi ukwenziwa lukhuni ukwelashwa ngokushisa.Izokhiqiza i-magnetism ngesikhathi sokusebenza okubandayo.I-304 insimbi engagqwali inokumelana nokugqwala okuqinile kanye nezakhiwo ezinhle zomzimba.

♦316 insimbi engagqwali

Insimbi engagqwali engu-316 yonakaliswa ukusebenza okubandayo ukuze ithuthukise izakhiwo zayo ezinwebekayo, futhi ayikwazi ukwenziwa lukhuni ngokwelashwa kokushisa.Izokhiqiza i-magnetism ngesikhathi sokusebenza okubandayo.Insimbi engagqwali engu-316 iqukethe i-molybdenum, enokumelana nokugqwala okuqinile kunensimbi engagqwali engama-304, futhi ingamelana nokugqwala ekusetshenzisweni kwamakhemikhali.

♦17-7PH (GH631, 0Cr17Ni7Al)

17-7PH ukumelana nokugqwala okufanayo ku-304 insimbi engagqwali, engancishiswa ukwelashwa kokushisa nokuqina kwemvula.Inokuqina okuphezulu namandla esivuno.Ukusebenza kokukhathala kungcono kunensimbi engagqwali engama-304 nensimbi ye-carbon engu-65Mn.Iphinde ibe nokunwebeka okuhle ngaphansi kwemvelo engu-℃.

♦I-15-7Mo (GH632, 0Cr15Ni7Mo2Al)

15-7MoHas ukumelana nokugqwala okufanayo ku-316 insimbi engagqwali.Ingabangelwa ukwelashwa kokushisa kanye nokuqina kwemvula.Inamandla aphezulu futhi ikhiqiza amandla, futhi ukusebenza kwayo kokukhathala kungcono kunensimbi engagqwali engu-316 kanye ne-65Mn carbon steel.Iphinde ibe nokunwebeka okuhle ngaphansi kwemvelo engu-℃.

♦I-Inconel X-750 (GH4145)

I-Inconel X-750 iyi-nickel-based precipitation hardening deformation superalloy.Ngokuyinhloko isebenzisa i-r'phase njengesigaba sokuqina kwemvula yokuguga.Izinga lokushisa elinconywayo lingaphansi kuka-540℃.I-alloy inokumelana nokugqwala okuthile nokumelana ne-oxidation, futhi inokusebenza okuthile okuphansi kwezinga lokushisa.

♦I-Inconel 718 (GH4169)

I-Inconel 718 iyi-nickel-based precipitation hardening deformation superalloy.Izinga lokushisa elinconywayo lingu-253–600℃.I-alloy inamandla aphezulu angaphansi kuka-600 ° C, inokumelana nokukhathala okuhle, ukumelana nemisebe, ukumelana ne-oxidation nokumelana nokugqwala, kanye nokusebenza kahle kokucubungula kanye nokuzinza kwesakhiwo sesikhathi eside.

♦I-A-286 (GH2132, SUH660)

I-alloy A-286 i-iron-based precipitation hardening deformation high-temperature alloy.Izinga lokushisa elinconywayo lokusebenza lingaphansi kuka-540℃.I-alloy inamandla okushisa aphezulu naphansi kanye nokuzinza kwesikhathi eside, ukumelana nokugqwala okuhle nokusebenza kwe-thermal deformation, futhi ine-plasticity enhle yokucubungula nokusebenza okwanelisayo kwe-welding.

1. Gxila ekushiseni okuphezulu kanye nemvula eqhubekayo
Ukushisa okuphezulu kwentwasahlobo kukhethekile ocwaningweni nokukhiqizwa kwentwasahlobo yokushisa okuphezulu, ukuqoqwa kokugcina kuzoba inqubekelaphambili elandelayo.
2. Isevisi yokuma okukodwa yezigaba eziphelele
Ukukhiqizwa kwefekthri ephezulu yokushisa kwentwasahlobo ye-compression spring, intwasahlobo elula, i-disc spring, i-wave spring, intwasahlobo yamaqabunga kanye nentwasahlobo yobulili obuhlukile.
3. Impahla eyanele kanye nesiqinisekiso sokudiliva
Kunezinhlobo ezingaphezu kuka-20 namakhulu ezicaciso zezinto zesevisi yakho
4. Idokhi yobuchwepheshe ithola umphumela ophindwe kabili ngohhafu womzamo
Izinga lokushisa eliphezulu lokuzizwisa kwemvula yasentwasahlobo yedizayini yakho nemikhiqizo ukuhlinzeka ngesixazululo esinengqondo kakhudlwana.
5. Ukusebenza kokuhlolwa kwezinga lokushisa okuphezulu okusobala
Ukuhlolwa kokukhathala kwezinga lokushisa eliphezulu kanye nokuhlolwa kwezakhiwo zomshini wokushisa okuphezulu, ukuze ukwazi ukuqonda ukusetshenziswa kokuqiniseka.
6. Ubuningi obungenamkhawulo, obulula futhi obunokwenzeka
Inombolo engenamkhawulo yamafekthri entwasahlobo ehlobo lokushisa eliphezulu ukuze unciphise izindleko zakho zokuthenga kanye nezingozi.

Okwedlule: I-Incoloy 20,Ingxubevange 20,UNS N08020

Olandelayo: Ipuleti le-Inconel, i-Inconel spring washer engenisiwe, indandatho, induku, ipayipi, okujwayelekile

Bhala umyalezo wakho lapha futhi usithumelele wona