I-Nickel Welding Wire ERNiCu-7 Monel 400/K500 intambo yokushisela

Imininingwane Yomkhiqizo

/haynes-25-alloy-l605-co350-welding-wire-product/

I-ErNicu-7 (Monel 400/K500) Intambo yokushisela

♦Igama Lempahla Yokushisela: I-Nickel Welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire

♦I-MOQ: 15kg

♦Ifomu: MIG(15kgs/spool), TIG(5kgs/box)

♦Usayizi: Ububanzi 0.01mm-8.0mm

♦Usayizi Ojwayelekile: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM

♦Amazinga: Ivumelana Nesitifiketi AWS A5.14 ASME SFA A5.14

Xhumana Nathi Ukuze Ufunde Kabanzi!

I-ErNiCu-7 I-based Material i-Monel 400 kanye ne-Monel K500, Le ntambo yokushisela isetshenziselwa kakhulu ukushisela i-MONEL400 alloy, i-MONELR404 alloy ne-MOENLK-500 alloy nge-tungsten inert-gas welding, i-MGW kanye ne-arc welding engaphansi kwamanzi, futhi ingasetshenziselwa ukushisela ngaphezulu kwensimbi. nge-MGW kanye nokushiselwa kwe-arc emanzini.

Kunconywa ukusebenzisa isembozo se-nickel ye-Erni-1 ngezimo ezithile zokushisela igesi.

I-ERNiCu-7 Chemical Composition

C	Al	Ni	Si	Mn	P	S	Fe	Cu	Ti	Okunye
≤0.15	≤1.25	62.0-69.0	≤1.25	≤4.0	≤0.02	≤0.015	≤2.5	U-Bal	1.5-3.0	≤0.50

I-ERNiCu-7 Amapharamitha we-Welding ajwayelekile

Ububanzi		Inqubo	I-Volt	Ama-Amps	I-Shielding Gas
In	mm	Inqubo	I-Volt	Ama-Amps	I-Shielding Gas
0.035	0.9	I-GMAW	26-29	150-190	75%Argon+25%Helium
0.045	1.2	I-GMAW	28-32	180-220	75%Argon+25%Helium
1/16	1.6	I-GMAW	29-33	200-250	75%Argon+25%Helium
0.035	0.9	I-GTAW	12-15	60-90	100% Argon
0.045	1.2	I-GTAW	13-16	80-110	100% Argon
1/16	1.6	I-GTAW	14-18	90-130	100% Argon
3/32	2.4	I-GTAW	15-20	120-175	100% Argon
1/8	3.2	I-GTAW	15-20	150-220	100% Argon
3/32	2.4	SAW	28-30	275-350	I-flux efanelekile angase ayisebenzise
1/8	3.2	SAW	29-32	350-450	I-flux efanelekile angase ayisebenzise
5/32	4.0	SAW	30-33	400-550	I-flux efanelekile angase ayisebenzise

I-ERNiCu-7 Mechanical Properties

Isimo	I-Tensile Strength MPa (ksi)	I-Yield Strength MPa (ksi)	Elongation%
Ukuvuselelwa kabusha kwe-AWS	480(70) Okuvamile	Akucacisiwe	Akucacisiwe
Imiphumela ejwayelekile njengoba ishiselwe	530(77)	360(53)	34

Kungani i-ERNiCu-7?

•Akukho Preheat edingekayo, izinga lokushisa eliphezulu lokudlula elingu-150℃ futhi ayikho i-PwHT edingekayo
•Izicelo zokushisela ezingafani zifaka phakathi ukuhlanganisa ama-alloys ku-Nickel 200 nama-copper-nickel alloys-
•Isetshenziswa kakhulu ezindaweni zasolwandle ngenxa yokumelana kwayo kahle nemiphumela eyonakalisayo yamanzi olwandle namanzi anosawoti.
•Ingasetshenziselwa ukumbondela kwe-MIG ensimbi ngemva kongqimba lokuqala olune-nickel 208