I-Nickel Welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire
I-Nickel Welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire,
AWS A5.14 ErNiCu7, I-Monel 400/K500 Nickel Welding, i-nickel welding wire,
I-ErNicu-7 (Monel 400/K500) Intambo yokushisela
♦Igama Lempahla Yokushisela: I-Nickel Welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire
♦I-MOQ: 15kg
♦Ifomu: MIG(15kgs/spool), TIG(5kgs/box)
♦Usayizi: Ububanzi 0.01mm-8.0mm
♦Usayizi Ojwayelekile: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦Amazinga: Ivumelana Nesitifiketi AWS A5.14 ASME SFA A5.14
Xhumana Nathi Ukuze Ufunde Kabanzi!
I-ErNiCu-7 I-based Material i-Monel 400 kanye ne-Monel K500, Le ntambo yokushisela isetshenziselwa kakhulu ukushisela i-MONEL400 alloy, i-MONELR404 alloy ne-MOENLK-500 alloy nge-tungsten inert-gas welding, i-MGW kanye ne-arc welding engaphansi kwamanzi, futhi ingasetshenziselwa ukushisela ngaphezulu kwensimbi. nge-MGW kanye nokushiselwa kwe-arc emanzini.
Kunconywa ukusebenzisa isembozo se-nickel ye-Erni-1 ngezimo ezithile zokushisela igesi.
I-ERNiCu-7 Chemical Composition
| C | Al | Ni | Si | Mn | P | S | Fe | Cu | Ti | Okunye |
| ≤0.15 | ≤1.25 | 62.0-69.0 | ≤1.25 | ≤4.0 | ≤0.02 | ≤0.015 | ≤2.5 | U-Bal | 1.5-3.0 | ≤0.50 |
I-ERNiCu-7 Amapharamitha we-Welding ajwayelekile
| Ububanzi | Inqubo | I-Volt | Ama-Amps | I-Shielding Gas | |
| In | mm | ||||
| 0.035 | 0.9 | I-GMAW | 26-29 | 150-190 | 75%Argon+25%Helium |
| 0.045 | 1.2 | I-GMAW | 28-32 | 180-220 | 75%Argon+25%Helium |
| 1/16 | 1.6 | I-GMAW | 29-33 | 200-250 | 75%Argon+25%Helium |
| 0.035 | 0.9 | I-GTAW | 12-15 | 60-90 | 100% Argon |
| 0.045 | 1.2 | I-GTAW | 13-16 | 80-110 | 100% Argon |
| 1/16 | 1.6 | I-GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | I-GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.2 | I-GTAW | 15-20 | 150-220 | 100% Argon |
| 3/32 | 2.4 | SAW | 28-30 | 275-350 | I-flux efanelekile angase ayisebenzise |
| 1/8 | 3.2 | SAW | 29-32 | 350-450 | I-flux efanelekile angase ayisebenzise |
| 5/32 | 4.0 | SAW | 30-33 | 400-550 | I-flux efanelekile angase ayisebenzise |
I-ERNiCu-7 Mechanical Properties
| Isimo | I-Tensile Strength MPa (ksi) | I-Yield Strength MPa (ksi) | Elongation% |
| Ukuvuselelwa kabusha kwe-AWS | 480(70) Okuvamile | Akucacisiwe | Akucacisiwe |
| Imiphumela ejwayelekile njengoba ishiselwe | 530(77) | 360(53) | 34 |
Kungani i-ERNiCu-7?
•Akukho Preheat edingekayo, izinga lokushisa eliphezulu lokudlula elingu-150℃ futhi ayikho i-PwHT edingekayo
•Izicelo zokushisela ezingafani zifaka phakathi ukuhlanganisa ama-alloys ku-Nickel 200 nama-copper-nickel alloys-
•Isetshenziswa kakhulu ezindaweni zasolwandle ngenxa yokumelana kwayo kahle nemiphumela eyonakalisayo yamanzi olwandle namanzi anosawoti.
•Ingasetshenziselwa ukumbondela kwe-MIG ensimbi ngemva kongqimba lokuqala olune-nickel 208
I-MOQ: 15kg
Ifomu: MIG(15kgs/spool), TIG(5kgs/box)
Usayizi: Ububanzi 0.01mm-8.0mmUsayizi Ojwayelekile:0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Amazinga: Ivumelana Nesitifiketi AWS A5.14 ASME SFA A5.14
