Inconel Wave Spring

Imininingwane Yomkhiqizo

Igagasi-intwasahlobo-01

♦ I-Inconel Wave Springs

I-Wave spring iyingxenye yensimbi enwebekayo emise okwendandatho ezacile eyakhiwa amagagasi nezigodi ezimbalwa.Imithombo ye-Wave isetshenziswa kabanzi kumamotho, imishini yendwangu, imishini ye-hydraulic, izimoto nezinye izimboni.Ukufakwa okuyinhloko kanye nokucaciswa (usayizi ojwayelekile) wekamelo lokuthwala kufanelekile.Noma emgodini, indawo yokufaka incane, futhi inomsebenzi okhethekile wokunciphisa umsindo nokunciphisa ukudlidliza.

Ububanzi bangaphandle busukela ku-6mm kuye ku-1000mm.ububanzi busukela ku-0.4mm kuye ku-5.0mm.

• Izisetshenziswa Zasentwasahlobo Zokushisa Okuphezulu:

I-SUS304,I-SUS316, SUS631/17-7PH, SUS632/15-7Mo, 50CrVA, 30W4Cr2VA,

I-Inconel X-750,Isilinganiso 718, I-Nimonic90, I-Incoloy A286(SUH660)

• Izinhlobo zasentwasahlobo:

→Imithombo Yokucindezela →Intwasahlobo yesandiso

→Intwasahlobo yeTorsion →Intwasahlobo egobayo

♦ Intwasahlobo ye-Wave ♦ SkrolaIntwasahlobo♦ I-Disc Spring

♦ I-Ring Spring ♦ I-Special-Shaped Spring, njll

Umshini Wasentwasahlobo

 

Izinhlobo Zezinto Ezibalulekile

Igama Lempahla

Izinga lokushisa eliphezulu Lokusebenza°C

insimbi engagqwali

SUS304/SUS316

200

SUS631/17-7PH

370

SUS632/15-7Mo

470

I-alloy spring steel

50CrVA

300

30W4Cr2VA

500

Izinga lokushisa eliphakeme le-nickel base alloy

I-Incoloy A286(GH2132)

600

I-Inconel X-750(GH4145)

600

I-Inconel 718 (GH4169)

690

I-Nimonic90(GH4090)

800 (γ<0.2)

GH4099

1000 (γ<0.1)

I-inconel 625 washer, i-Disc spring, i-gasket, indandatho ehlangene

♦ Ama-Disc Springs

Asetshenziswa kakhulu kuma-valve, ama-flange, ama-clutches, amabhuleki, iziguquli ze-torque, i-High-voltage switch, i-bolt tightening, ukwesekwa kwamapayipi, i-shockproof kanye nezinkambu ze-shockproof.bakhiqize ngokuhambisana ne-DIN EN16983 (DIN2093).

Ububanzi bangaphandle busukela ku-6mm kuye ku-1000mm.

Izinto zifaka phakathiingxubevange steel 51CrV4, carbon steel SK85, 1074;

• Insimbi engagqwali ASTM301, 304, 316, 17-7PH, 17-4PH, 15-7Mo;

• Insimbi ekwazi ukumelana nokushisa i-H13, X30WCrV53, X22CrMoV12-1, X39CrMo17-1;

• Insimbi engagqwali imelana nokushisa okuphezulu Inconel X750, Inconel X718, Nimonic 90, njll.

Ukuvikelwa kokugqwala

  • I-Phosphating
  • I-Mechanical galvanizing
  • I-Nickel plated
  • Jiaomei

Banezici ze-deformation encane kanye nomthwalo omkhulu.Iphinde ibe nezici ezilandelayo.

  • Ama-disc springs angathola izici ezihlukene zomthwalo ngokusebenzisa inhlanganisela ehlukene yokuguquguquka nokugqagqana.
  • Uma kuqhathaniswa nezinye iziphethu, ama-disc springs athatha indawo encane.
  • Lapho kusetshenziswa amashidi amaningi ngokuhlanganiswa, umphumela wokudambisa uyakhula.
  • Uma isetshenziswe ngokunengqondo, ngeke ikhubazeke noma iphuke.
  • Impilo ende yokukhathala.
Izinto Zasentwasahlobo Isikhathi Sokusebenza Amandla Okuqina I-Elastic Modulus KN//mm2 I-Chemistry%
°C N/mm2 RT°C 100°C 200°C 300°C 400°C 500°C 600°C C Si Mn P S Cr Ni

Abanye
 
I-T8A SK85
-50 ukuze +100 1200-1800 206 202 - - - - - 0.80-0.09 ≤ 0.35 ≤ 0.50 ≤ 0.03 ≤ 0.03 ≤ 0.20 ≤ 0.25 Cu0.30
50CrV4 SUP10
-50 ukuze +200 1200-1800 206 202 196 - - - - 0.47-0.55 ≤ 0.4 0.71.1 ≤ 0.025 0.025 0.9 1.2 ≤ 0.4 V:0.1 0.25I-Mo≤ 0.1 
C75 -50 ukuze +100 1200-1800 206 202 - - - - - 0.70-0,80 0.15-0.35 0.60 0.90 ≤ 0.025 0.025 ≤ 0.4 ≤ 0.4 I-Mo≤ 0.1 
60Si2Mn SUP6 -50 ukuze +200 1200-1800 206 202 196 - - - - 0.56-0.64 1.50-2.0 0.6 0.9 ≤ 0.035 0.035 ≤ 0.35 ≤ 0.35  
I-X 10CrNi 18-8 SUS301 -200 ukuze +200 1150-1500 190 186 180 - - - - 0.05-0.15 ≤ 2.0 ≤ 2.0 ≤ 0.045 0.015 16.0 19.0 6.0 9.5 I-Mo≤ 0.08 
I-X 5CrNi 18-10SUS304 -200 ukuze +200 1000-1500 185 179 171 - - - - ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.015 17.0 19.5 6.0 9.5 N≤ 0.11
I-X 5CrNiMo 17-12-2 SUS316 -200 ukuze +200 1000-1500 180 176 171 - - - - ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.015 16.5-18.5 10.0 13.0 Mo:2.0-2.5N≤ 0.11
X 7CrNiAl 17-7 SUS631 -200 ukuze +300 1150-1700 195 190 180 171 - - - ≤ 0.09 ≤ 0.7 ≤ 1.0 ≤ 0.04 0.015 16.0 18.0 6.5 7.8 Al:0.7-1.5
I-X5CrNiCuNb 16-4 SUS630 -200 ukuze +300 1150-1700 195 190 180 171 - - - ≤ 0.07 ≤ 1.0 ≤ 1.0 ≤ 0.035 0.03 15.0 17.0 3.0 5.0  
I-X8CrNiMoAl 15-7-2 -200 ukuze +300 1150-1700 195 190 180 171 - - - ≤ 0.09 ≤ 1.0 ≤ 1.0 ≤ 0.04 0.03 14.0 16.0 6.5 7.75 Mo:2.0-3.0Al:0.75-1.5
Insimbi
I-X39CrMo 17-1
-50 ukuze +400 1200-1400 215 212 205 200 190 - - 0.33-0.45 ≤ 1.0 ≤ 1.5 ≤ 0.04 0.03 15.5 17.5 ≤ 1.0 Mo:0.7-1.3 
X 22CrMoV 12-1 -50 ukuze +500 1200-1400 216 209 200 190 179 167 - 0.18-0.24 ≤ 0.5 0.4 0.9 ≤ 0.025 0.015 11 12.5 0.3-0.8 V:0.25-0.35Mo:0.8-1.2 
X30WCRV53 SKD4 -50 ukuze +500 ≥ 1470 216 209 200 190 179 167 - 0.25-0.35 0.15-0.30 0.20 0.40 ≤ 0.035 0.035 2.2 2.5 ≤ 0.35 V:0.5-0.7       W: 4-5  
X40CrMoV5-1 SKD61 -150 ukuze +600 1650-1990 206 200 196 189 186 158 - 0.32 0.40 0.8 1.20 0.20 0.50 ≤ 0.030 0.030 4.75 5.50   V:0.80-1.20Mo:1.1-.75 
I-Nickel
I-Inconel X750
-200 ukuze +600 ≥ 1170 214 207 198 190 179 170 158 ≤ 0.08 ≤ 0.50 ≤ 1.0 ≤ 0.02 0.015 14.0 17.0
≥ 70
Co≤ 1.0 Ti2.25-2.75 Fe 5.0-9.0
I-Inconel X718 -200 ukuze +600 ≥ 1240 199 195 190 185 179 174 167 0.02 0.08 ≤ 0.35 ≤ 0.35 ≤ 0.015 0.015 17.0 21.0 50.0 55.0 I-V≤ 1.0Mo:0.70-1.15 
I-Nimonic 90 -200 ukuze +700 ≥ 1100 220 216 208 202 193 187 178 ≤ 0.13 ≤ 1.0 ≤ 1.0 ≤ 0.03 0.015 18.0 21.0 U-Bal V15.0-21.0Mo:2.0-3.0    I-Al≤ 0.2

♦ Izici Zezinto Zokusebenza Zentwasahlobo Yokushisa Okuphezulu: ♦

♦ 304 insimbi engagqwali
I-304 insimbi engagqwali ikhubazekile ngenxa yokusebenza okubandayo ukuze ithuthukise izakhiwo zayo ezinwebekayo.Ayikwazi ukwenziwa lukhuni ukwelashwa ngokushisa.Izokhiqiza i-magnetism ngesikhathi sokusebenza okubandayo.I-304 insimbi engagqwali inokumelana nokugqwala okuqinile kanye nezakhiwo ezinhle zomzimba.

 316 insimbi engagqwali

Insimbi engagqwali engu-316 yonakaliswa ukusebenza okubandayo ukuze ithuthukise izakhiwo zayo ezinwebekayo, futhi ayikwazi ukwenziwa lukhuni ngokwelashwa kokushisa.Izokhiqiza i-magnetism ngesikhathi sokusebenza okubandayo.Insimbi engagqwali engu-316 iqukethe i-molybdenum, enokumelana nokugqwala okuqinile kunensimbi engagqwali engama-304, futhi ingamelana nokugqwala ekusetshenzisweni kwamakhemikhali.

 17-7PH (GH631, 0Cr17Ni7Al)

17-7PH ukumelana nokugqwala okufanayo ku-304 insimbi engagqwali, engancishiswa ukwelashwa kokushisa nokuqina kwemvula.Inokuqina okuphezulu namandla esivuno.Ukusebenza kokukhathala kungcono kunensimbi engagqwali engama-304 nensimbi ye-carbon engu-65Mn.Iphinde ibe nokunwebeka okuhle ngaphansi kwemvelo engu-℃.

 I-15-7Mo (GH632, 0Cr15Ni7Mo2Al)

15-7MoHas ukumelana nokugqwala okufanayo ku-316 insimbi engagqwali.Ingabangelwa ukwelashwa kokushisa kanye nokuqina kwemvula.Inamandla aphezulu futhi ikhiqiza amandla, futhi ukusebenza kwayo kokukhathala kungcono kunensimbi engagqwali engu-316 kanye ne-65Mn carbon steel.Iphinde ibe nokunwebeka okuhle ngaphansi kwemvelo engu-℃.

 I-Inconel X-750 (GH4145)

I-Inconel X-750 iyi-nickel-based precipitation hardening deformation superalloy.Ngokuyinhloko isebenzisa i-r'phase njengesigaba sokuqina kwemvula yokuguga.Izinga lokushisa elinconywayo lingaphansi kuka-540℃.I-alloy inokumelana nokugqwala okuthile nokumelana ne-oxidation, futhi inokusebenza okuthile okuphansi kwezinga lokushisa.

 I-Inconel 718 (GH4169)

I-Inconel 718 iyi-nickel-based precipitation hardening deformation superalloy.Izinga lokushisa elinconyiwe lingu -253--600℃.I-alloy inamandla aphezulu angaphansi kuka-600 ° C, inokumelana nokukhathala okuhle, ukumelana nemisebe, ukumelana ne-oxidation nokumelana nokugqwala, kanye nokusebenza kahle kokucubungula kanye nokuzinza kwesakhiwo sesikhathi eside.

 I-A-286 (GH2132, SUH660)

I-alloy A-286 i-iron-based precipitation hardening deformation high-temperature alloy.Izinga lokushisa elinconywayo lokusebenza lingaphansi kuka-540℃.I-alloy inamandla okushisa aphezulu naphansi kanye nokuzinza kwesikhathi eside, ukumelana nokugqwala okuhle nokusebenza kwe-thermal deformation, futhi ine-plasticity enhle yokucubungula nokusebenza okwanelisayo kwe-welding.


  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona